Notification/Circular No.: G.S.R. 953(E) dated October 28, 2026
Applicable Act/Rule: Drugs and Cosmetics Act, 1940; Drugs Rules, 1945 (Schedule M, Part II)
Applicable Section/Rule: Section 12(1) and Section 33(1) of the Drugs and Cosmetics Act, 1940; Schedule M, Part II, Requirement 4, para 4.9, Table 3 of the Drugs Rules, 1945
The Ministry of Health and Family Welfare (Department of Health and Family Welfare) has issued draft rules via G.S.R. 953(E), proposing an amendment to the Drugs Rules, 1945 under the powers of section 12(1) and section 33(1) of the Drugs and Cosmetics Act, 1940. The draft concerns updating microbial contamination limits for sterile manufacturing environments under Schedule M.
The draft, titled the Drugs (Amendment) Rules, 2026, will come into force from the date specified by the Government at the time of final publication in the Official Gazette. The Central Government will take these draft rules into consideration on or after the expiry of thirty days from the date on which copies of the Gazette of India containing the draft are made available to the public.
Comments are invited within the specified period. Objections and suggestions may be addressed to the Under Secretary (Drugs), Ministry of Health and Family Welfare, Government of India, U-6, Work Hall- C Wing, First Floor, Kartavya Bhawan-1, New Delhi, 110001, or emailed to drugsdiv-mohfw@gov.in. Submissions received within the period will be considered by the Central Government.
The amendment substitutes Table 3 under Schedule M, Part II (Specific Requirements for Manufacture of Sterile Products, Parenteral Preparations and Sterile Ophthalmic Preparations), Requirement 4, para 4.9, to prescribe recommended limits for microbial contamination. The limits are specified for Grade A, B, C and D environments across four measures: air sample (CFU/m3), settle plates (diameter 90 mm) (CFU/4 hours), contact plates (diameter 55 mm) (CFU/plate), and glove print (5 fingers) (CFU/glove). Grade A requires “No growth” for all measures; Grade B specifies 10, 5, 5, and 5 respectively; Grade C specifies 100, 50, 25, and “–” for glove print; and Grade D specifies 200, 100, 50, and “–” for glove print.
Link: https://egazette.gov.in/WriteReadData/2026/277619.pdf
Disclaimer: The information contained in this Article is intended solely for personal non-commercial use of the user who accepts full responsibility of its use. The information in the article is general in nature and should not be considered to be legal, tax, accounting, consulting or any other professional advice. We make no representation or warranty of any kind, express or implied regarding the accuracy, adequacy, reliability or completeness of any information on our page/article.
To stay updated Subscribe to our newsletter today
Explore other Legal updates on the Corplico and follow us on LinkedIn to stay updated